BOARD WITH ETHERNET INTERFACE FOR LPC2124 ARM7TDMI-S MICROCONTROLLERFEATURES:

MCU: LPC2124 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
CS8900 Ethernet interface
two general purpose buttons
potentiometer connected to analog input 0
Dallas i-button interface
24LC515 EEPROM for external web storage
standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
two on board voltage regulators 1.8V and 3.3V with up to 800mA current
single power supply: +5VDC required
three LAN status LEDs, three general purpose status LEDs
power supply filtering capacitor
USB to RS232 interface
RESET circuit with exterman control of Philips ISP utility via USB/RS232
RESET button
DBG jumper for JTAG enable
BSL jumper for bootloader enable
JRST jumper for enable/disable external RESET vontrol by RS232
14.7456 Mhz crystal
extension header for all uC ports
PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
Dimensions: 80x90 mm (3.15x3.55")